Table of Contents
Advertisement
Pulse current display mode
Pulse current measurements are displayed with the pulse current display mode
selected. This display mode is selected as follows:
To display measured readings if the instrument is in the settings
NOTE
mode, press the SET key until the blinking stops (the measured
readings can then be displayed). To determine if the instrument
is in the settings mode, check for a blinking cursor in a digit of
the voltage or current field (if present, the instrument is in the
settings mode).
1. Press the DISPLAY key to access the display menu.
2. If the desired active channel is not selected, use the
DISPLAY TYPE #1 or DISPLAY TYPE #2.
3. Press the
or
▲
▼
4. Press the ENTER key to select.
5. Use the
or
keys to scroll to the desired pulse measurement; PULSE HI,
▲
▼
PULSE LO, or PULSE AVG.
keys to scroll to PULSE CURRENT.
Front-panel operation
17
or
keys to scroll to
Advertisement
Table of Contents
