Advertisement
Please note:
* Thank you for purchasing the LIFE FITNESS 8115 FLAT & INCLINE BENCH. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled on a
flat, level surface to assure its proper function.
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your LIFE FITNESS customer service representa-
tive at (800) 328-9714.
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please
follow these rules:
1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.
Failure to do so may result in serious injury.
2. Do not allow minors or children to play on or around this equipment.
3. Exercise with care to avoid injury.
4. If unsure of proper use of equipment, call your local LIFE FITNESS STRENGTH distributor or
call the LIFE FITNESS STRENGTH customer service department at (800) 328-9714.
5. Consult your physician before beginning any exercise program.
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH RULER:
1/2
0
IMPORTANT NOTES
Tools Required for Assembly
* Rubber mallet or hammer
* 3/4" wrench, 9/16" wrench
* Ratchet with 3/4" and 9/16" sockets
* Adjustable wrench
* Tape measure
Bolt Length Ruler
BOLT LENGTH
1/2
1/2
1
2
1/2
1/2
3
4
2
1/2
5
6
Advertisement
