Rack Mounting Kit; Installation - Dedicated Micros Digital sprite 2 Setup Manual Addendum

Rack mounting kit

A rack mounting kit is supplied with this product, it is important to use it correctly. The kit
comprises of:
4 x
(Rack mount screws)
2x
(Rack mount ears)
2x
(Rear supports)

Installation

Before connecting cables to the back of the unit:
1. Attach the rear supports to the rack.
2. Using the supplied screws, attach the rack mount ears to each side of the unit.
3. Position the unit on the rear supports.
4. Attach the rack mount ears to the front of the rack.
Warning: The rear supports must be used when rack mounting the product, failure to use them
may cause damage to the unit.
8