Using The Remote Control - Dedicated Micros Digital sprite 2 Setup Manual Addendum

Copy an event to CDR or external Zip and Jaz
Highlight the event to be copied, and press the copy button. The event will be copied to the
CDR Archive list. If the 'Copy destination on the previous page is set to 'External', then the
images will be copied to an external Zip or Jaz disk.
View more activities
To view more than a page of activities scroll down to the bottom of the list, the unit will
search further back in time and another list of activities will appear. When there are no more
activities to list an end bar '===============' is displayed.
Start a new search
If you wish to start a new search, you must tap the 'menu' key to exit the Activity list, then re-
enter 'Search Setup' as described in step 1.
Recording to the internal CDR
Recording to the internal CDR has exactly the same operation as you would if you are recording
to external CDR devices. The recording to CDR section on the 'Using DS2' card also applies to
the internal drive.
The 'Copy Destination' is the one difference that is apparent in the menus, to copy to the
internal CDR, select 'CDO: IDE 0 TOSHIBA DVD-ROM'.

Using the remote control

The remote control included with the Digital Sprite 2 operates the same as the front panel, see
the operator card for details.
To use the remote control the 'IR receiver' option needs to be enabled in the 'System Options'
menu page. The remote control provides the following functions:
UNIT SELECT
MODE
HOLD
SPOT
EVENT
GOTO
1 –16
Notes: The remote control does not have the ability to control a
video switcher if multiple units are connected together, only a
remote keyboard has this ability.
If multiple Digital Sprite 2s are connected together using the 485-
bus, only one of these units should have the IR receiver enabled.
The option to disable the IR receiver is in the System Options
menu page.
7
Press 'UNIT SELECT' followed by a
camera key to log onto another unit.
Press to toggle Spot mode on and off,
or to return to Live mode when playing
back.
Toggle freeze frame On and Off.
Toggle Spot mode on and off, Selects
operation of the spot monitor.
Press to display the Event log.
Press to display the Goto time option.
Camera selection keys.
Use to control the cursor in menus, or
scroll around the screen when in zoom
mode.
Control playback of the Digital Sprite 2.