Alarm Setup; Activity Setup; Display Setup - Dedicated Micros Digital sprite 2 Setup Manual Addendum

Video Storage (Protected%)
The total video storage in Gigabytes (GB) is displayed along with the percentage of video
storage which is protected (will not be overwritten). Note that the calculations for recording
time assume there is no protected video. Video that is protected will need to be manually
unprotected in the 'Record Options' before it can be used for recording again.
Advanced Record Schedule (New page 19)
Cameras connected to the Digital Sprite 2 can be recorded at a High, Medium (Standard) or Low
priority for day, night, and weekend schedules. This allows cameras in sensitive areas to be
recorded more frequently than cameras located in less sensitive areas.
By default, all connected cameras are set at the Standard record priority; cameras that are not
connected are greyed out and cannot be changed.
As the user changes the priority levels, the update rate per camera (in seconds) is
automatically calculated by the Digital Sprite 2 for High, Standard, and Low priority cameras
and also the Average update rate.
The update rate is based on the record rate (PPS) set in the Record Schedule menu and the
number of cameras connected to the Digital Sprite 2. The update rate per camera is the
number of seconds before the camera is updated when recorded, in the example above, during
the day a High priority camera records every 1.54 seconds.
The recording priority can be adjusted for each camera for Day, Night, and Weekend schedules.
Note that changing the priority of a camera, or not recording cameras will not increase or
decrease the recording time, the Record rate and the File size in the Record Schedule menu are
used to set this.
Note: The Night and Weekend options are only displayed if a corresponding Night and Weekend
schedule has been configured in the Schedule menu.
To change the priority of cameras to be recorded:
1. Ensure that the correct record rates have been set in the 'Record Schedule' menu.
2. Move the cursor to a camera to be prioritised.
3. Tap either or to change the priority to Low
is also possible to disable recording of individual cameras by selecting
4. Continue to select the priority of each camera, notice that the update rates are
automatically calculated depending on the number of cameras recording at each rate.
5. If the update rate is not fast enough, you may need to reduce the nmber of high priority
cameras or increase the record rate in the Record Schedule menu (although this will affect
the recording time).
Alarm Setup (Page 19)
The Global alarm contact can now use any of the ALARMS IN inputs from the rear of the unit:
Global alarm contact Aux
Off
Direct
Module XX
Multiple Alarms on a single camera
If you are connecting multiple alarms to a single camera, please contact TSG for advice.
Relay
The relays can now be selected to open, close, momentary open, and momentary close on an
alarm, activity, or cameras fail condition. A momentary close or open settings has a duration of
half a second regardless of the alarm length.
Activity Setup (Page 20)
Relay
The relays can be configured for activity detection as above.
Display Setup (Page 21)
There are new options for controlling a sequence on the Main monitor (Mon A):
3
, Standard , or High priority. It
.
Contact XX
Contact XX