Manage The Router Configuration File; Back Up Settings - NETGEAR N300 WNR2000v5 User Manual

N300 wi-fi router

Hide thumbs Also See for N300 WNR2000v5:

Installation (2 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

Table of Contents

You can use either the traffic volume control feature or the connection time control

feature:

•

Select the Traffic volume control by radio button and select one of the following

options:

No Limit. No restriction is applied when the traffic limit is reached.

Download only. The restriction is applied to incoming traffic only.

Both Directions. The restriction is applied to both incoming and outgoing traffic.

•

Select the Connection time control radio button and enter the allowed hours in the

Monthly limit field.

(Optional) If your ISP charges for extra data volume when you make a new connection,

enter the extra data volume in MB in the Round up data volume for each connection by

field.

In the Traffic Counter section, set the traffic counter to begin at a specific time and date.

If you want the traffic counter to start immediately, click the Restart Counter Now button.

In the Traffic Control section, specify whether the router should issue a warning message

before the monthly limit of Mbytes or hours is reached.

By default, the value is 0 and no warning message is issued. You can select one of the

following to occur when the limit is attained:

•

The Internet LED blinks green or amber.

•

The Internet connection is disconnected and disabled.

10.

Click the Apply button.

The Internet Traffic Statistics section helps you to monitor the data traffic.

11.

To update the Traffic Statistics section, click the Refresh button.

12.

To display more information about the data traffic on your router and to change the poll

interval, click the Traffic Status button.