Table of Contents
Advertisement
4.
Select Wireless.
5.
To control the SSID broadcast, select or clear the Enable SSID Broadcast check box.
When this check box is selected, the router broadcasts its network name (SSID) so that it
displays when you scan for local WiFi networks on your computer or wireless device.
6.
To change the SSID, type a new name in the Name (SSID) field.
The name can be up to 32 characters long and is case-sensitive. The default SSID is
randomly generated and is on the router's label. If you change the name, make sure to
write down the new name and keep it in a safe place.
7.
In the Region list, select your region.
In some locations, you cannot change this setting.
8.
To change the wireless channel, select a number in the Channel list.
In some regions, not all channels are available. Do not change the channel unless you
experience interference (shown by lost connections or slow data transfers). If this
happens, experiment with different channels to see which is the best.
When you use multiple access points, it is better if adjacent access points use different
channels to reduce interference. NETGEAR recommends channel spacing between
adjacent access points of four channels (for example, use Channels 1 and 5, or 6 and
10).
9.
To change the mode, select it from the Mode list.
•
Up to 150 Mbps. This is the default setting, which allows 802.11n and 802.11g
wireless devices to join the network.
•
g & b. This setting supports up to 54 Mbps. The
•
300-Mbps. This setting allows 802.11n devices to connect at this speed.
10.
Click the Apply button.
Your settings are saved.
N300 WiFi Router
Specify Network Settings
64
Hide quick links:
Advertisement
Table of Contents
