Table of Contents
Advertisement
4.
Select ADVANCED > Security > E-mail.
5.
Select the Turn E-mail Notification On check box.
6.
In the Your Outgoing Mail Server field, enter the name of your Internet provider outgoing
(SMTP) mail server (such as mail.myISP.com).
You might be able to find this information in the configuration screen of your email
program. If you leave this field blank, log and alert messages are not sent.
7.
In the Send to This E-mail Address field, enter the email address to which logs and alerts
are sent.
This email address is also used for the From address. If this field is blank, log and alert
messages are not sent.
8.
If your outgoing email server requires authentication, select the My Mail Server requires
authentication check box.
a. In the User Name field, type the user name for the outgoing email server.
b. In the Password field, type the password for the outgoing email server.
9.
To send alerts when someone attempts to visit a blocked site, select the Send Alerts
Immediately check box.
10.
To send logs based on a schedule, specify these settings:
•
From Send logs according to this schedule list, select the schedule type.
•
From the Day list, select the day.
•
From the Time list, select the time, and select the am or pm radio button.
11.
Click the Apply button.
Your settings are saved.
Logs are sent according to the schedule that you set. If the log fills before the specified
time, it is sent. After the log is sent, it is cleared from the router memory. If the router
cannot email the log and the log buffer fills up, the router overwrites the log.
N300 WiFi Router
Control Access to the Internet
53
Hide quick links:
Advertisement
Table of Contents
