Table of Contents
Advertisement
•
To block the services continuously, select the Always radio button.
•
To block the services based on a schedule, select the Per Schedule radio button.
For information about how to specify the schedule, see
Internet Sites and Services
6.
Click the Add button.
7.
To add a service that is in the Service Type list, select the application or service.
The settings for this service automatically display in the fields.
8.
To add a service or application that is not the list, select User Defined.
a. From the Protocol list, select a protocol.
If you are not sure what protocol the service or application uses, select TCP/UDP.
b. Enter the starting port and ending port numbers:
If the service uses a single port number, enter that number in both fields.
To find out which port numbers the service or application uses, you can contact the
publisher of the application, ask user groups or news groups, or search on the
Internet.
9.
Select a filtering option:
•
Only This IP Address. Block services for a single computer.
•
IP Address Range. Block services for a range of computers with consecutive IP
addresses on your network.
•
All lP Addresses. Block services for all computers on your network.
10.
Click the Add button.
Your changes are saved.
N300 WiFi Router
on page 51.
Control Access to the Internet
50
Schedule When to Block
Hide quick links:
Advertisement
Table of Contents
