Omega CN1001-RTD User Manual page 13

5 /DEV Button
During the run mode press the
from setpoint 1.
When configuring your setpoint values, press the
to the next digit.
6 MENU Button
In the run mode, press the MENU button to terminate the current
measuring process and enter you into the configuration mode.
In the configuration mode, press the MENU button to store changes in
the non-volatile memory and then advance you to the next menu item.
7 RESET Button
In the run mode, press the RESET button to reset the setpoints and
display "SP.RS". If display shows peak value, press the RESET button
to reset peak value. Display shows "PK.RS".
In the configuration mode, press the RESET button once to review the
previous menu.
Pressing the RESET button twice results in a hard reset and returns you
to the run mode.
/DEV button to display the deviation
/DEV button to scroll
7