Table of Contents
Advertisement
Table 5-1 Front PanelPart Description
ITEM Description
1
-1.9.9.9. or 9.9.9.9.
4-digit 14 segment, 0.54" high LED display with programmable
decimal point.
2
SETPOINT LED
These LEDs labled 1 and 2 display the status of setpoints 1 and 2.
3
SETPTS Button
This button functions only in the run mode. When the meter is in the run
mode, press this button to sequentially recall the previous setpoint
settings. After using the
settings as desired, press the SETPTS button to store these new values.
Unless you press the SETPTS button within 20 seconds to store your
input, the meter will scroll to setpoint 2 and retain the last value stored.
If the "L.3=1" on the "LK.CF" menu, pressing the SETPTS button will
display the meter's firmware version.
4
/MAX Button
During the run mode, press the
since the last press of the RESET button. To return to the current
readings without resetting the PEAK reading, press the
To reset the PEAK reading, press the RESET button.
During the configuration mode, use the
values of the flashing digit shown on the display and/or toggle between
menu choices, such as "R.1=F" or "R.1=C". When configuring your
setpoint values, press the
from 0 to 9 by 1's.
/MAX and
/DEV buttons to alter these
/MAX button to recall the PEAK reading
/MAX button to change the
/MAX button to increment the flashing digit
6
/MAX button.
Advertisement
Table of Contents
