Table of Contents
Advertisement
54
l
Setting COS (Class of Service)
Phameters
Message Cancel for Live Call Screening Status
31 The current setting is played.
Press 0
to change the current setting (enable or disable).
32
Confirm your entry and press 0
to accept it.
Direct Mailbox Access Status
33 The current setting is played.
Press 0
to change the current setting (enable or disable).
34 Confirm your entry and press m to accept it.
Intercom Paging Group Number
35 The current setting is played.
Press 0
to change the current number.
36
Enter the group number (1 - 8).
37 Confirm your entry and press m to accept it.
Subscriber Service Prompt Mode
38 The current setting is played.
Press 0. - m to change the desired mode.
39 Confirm your entry and press m to accept it.
Tip:
Step 38 -
0
System Prompt
m
User 1
Prompt
a
User 2
Prompt
m
Accept the current
prompt
mode
Message Notification Status
40 The current setting is played.
Press 0
to change the setting (enable or disable).
If the Message Notification
Status is enabled, go to step 41 - 45.
_ 41 Press 0
- Q to choose the desired Beeper Callback No.
Entry Mode or press a
to accept it.
Tip:
Step 41 -
You can set the way of pager access.
0
Caller Select Mode
a
Without
Message Mode
0
Before
Message Recording
Mode
m
After
Message Recording
Mode
Q
Disable
All Entry Mode (Caller cannot
access pager)
System Manager
5-9
Advertisement
Chapters
Table of Contents
