Panasonic KX-TVS751 Installation Manual page 191

4.5.6 Hardware Settings
r
Parameter
Value Range
(default)
Desc,ription/Function
Reference
Operator Transfer
(W
Used to transfer calls to the operator's extension. A.A.Service
Sequence
p.3-4
Operator
Service
p.3-46
Extension
Transfer Sequence
VW
Used to transfer calls to any extension other than
the operator's.
'2&~nsfel
p.3-IO
Alternate
Extension
Transfer Sequence
Reconnect
Sequence on Busy
Reconnect
Sequence on No-
answer
Reconnect
Sequence on
Refuse Call
(W
(F)
(F)
03
Used to transfer calls to the extension in Alternate Alternate
Extension Group.
Extension
Group
p.3-3
.
If the extension that a caller wants is busy, this
Incomplete
sequence allows the VPS to reconnect with the
Call
caller.
-Handling
Service
p.3-29
If the extension that a caller wants does not
answer, this sequence allows the VPS to reconnect
with the caller.
This sequence is carried out by the VPS to Call Transfe
retrieve the call on hold after the extension in the
Status
Call Screening mode has refused to take the call. p'3-'o
Light-On
Sequence for
(None) This is the dialing sequence that the VPS must
perform to turn on the message waiting lamp on
M.W.N.-
Lamp
p.3-41
Message Waiting
Lamp
an extension.
Light-Off
Sequence for
Message Waiting
Lamp
(None)
This is the dialing sequence that the VPS must
perform to turn off the message waiting lamp on
an extension.
Call Waiting
Sequence
Release Sequence
for Call Waiting
(1)
(F)
This sequence is carried out by
the
VPS to
Use Call
perform call waiting when the extension being
Waiting on
Busy
called is busy.
p.4-29
This sequence is carried out by the VPS to release
call waiting.
4-82
System Administrator