Oven Control Functions - Kenmore 790.7851 Series Use & Care Manual

Oven Control Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use ofyour oven, become familiar with
the various pad functions of the oven as described below.
BROIL PAD Used to UP and DOWN ARROW PADS Used along
select the variable broil with the function pads to select oven FEATUREINDICATOR
function, temperature, time of day, clean time and LIGHTS These light to
CLOCK SET \ minutetimer, show which feature is in
PAD Used _ / use.
to set the
time of day.. _
TIMERON/OFF • _ •
PAD-- Used to set i BAKEPAD Usedto
select the baKe functior
or cancel the minute
timer. The minute
timer does not start
or stop cooking.
Also,
TIMER ON/OFF pad
is used to set the
Continuous Bake
feature.
/
SELECT SELF-CLEAN
PAD-- Used to select the
Self-Cleaning cycle. A 2,
3 or 4 hour Self-Clean
time may be selected.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature, The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature, The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated. The indicator light
wilt glow constantly after the door locks.
STOP/CLEAR PAD
Used [o c_ear any
function previously
entered exceo_ the time
of day and mmu[e umer
Press STOP/CLEAR to
stop cooking. Also the
STOP/CLEAR pad is
used to activate Oven
Lockout setting.
,Note: The OVEN indicat0i light on the e!ectronic disp!aY wili turn QN and OFF when Using the Bake feature and during
preheat, This is normal and indicates that the ove n is cycling to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press _,o_ .... appears in the display.
2. Press and hold the A until "HI" appears in the display.
_-_ °C
3. Press and hold "o" until °F or appears in the display.
4. Press the A or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
10