Heated Mirrors - If Equipped; Illuminated Vanity Mirrors - If Equipped; Sun Visor "Slide-On-Rod" Feature - If Equipped; Blind Spot Monitoring (Bsm) - If Equipped - Jeep Cherokee 2014 Owner's Manual

Heated Mirrors — If Equipped
These mirrors are heated to melt frost
or ice. This feature can be activated
whenever you turn on the rear window
defroster (if equipped). Refer to "Rear
Window Features" in "Understanding The Fea-
tures Of Your Vehicle" for further information.
Illuminated Vanity Mirrors — If
Equipped
An illuminated vanity mirror is on each sun visor.
To use the mirror, rotate the sun visor down and
swing the mirror cover upward. The lights will
turn on automatically. Closing the mirror cover
will turn off the light.
72
PAGE POSITION: 74 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1461427-en-2014_CHEROKEE_EE+14KL-126-ENG-AA/DIV_Owners_Manual_v2
Illuminated Vanity Mirror
Sun Visor "Slide-On-Rod" Feature
— If Equipped
The sun visor "Slide-On-Rod" feature allows for
additional flexibility in positioning the sun visor
to block out the sun.
1. Fold down the sun visor.
2. Unclip the visor from the center clip.
3. Pull the sun visor toward the inside rearview
mirror to extend it.
BLIND SPOT MONITORING
(BSM) — IF EQUIPPED
The Blind Spot Monitoring (BSM) system uses
two radar-based sensors, located inside the
rear bumper fascia, to detect highway licens-
able vehicles (automobiles, trucks, motor-
cycles, etc.) that enter the blind spot zones from
the rear/front/side of the vehicle.
Rear Detection Zones
When the vehicle is started, the BSM warning
light will momentarily illuminate in both outside
rear view mirrors to let the driver know that the
system is operational. The BSM system sen-
sors operate when the vehicle is in any forward