Automatic Temperature Control (Atc) - Jeep Cherokee 2014 Owner's Manual

In MAX A/C, the blower level and mode position
can be adjusted to desired user settings. Press-
ing other settings will cause the MAX A/C
operation to switch to the selected setting and
cause MAX A/C to exit.
Recirculation
When outside air contains smoke,
odors, or high humidity, or if rapid
cooling is desired, you may wish to
recirculate interior air by pressing
the Recirculation control button.
The recirculation indicator will illu-
minate when this button is selected. Push the
button a second time to turn off the Recircula-
tion mode and allow outside air into the vehicle.
PAGE POSITION: 215 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1461427-en-2014_CHEROKEE_EE+14KL-126-ENG-AA/DIV_Owners_Manual_v2
NOTE:
In cold weather, use of Recirculation mode
may lead to excessive window fogging. The
recirculation feature may be unavailable (soft
button greyed out) if conditions exist that
could create fogging on the inside of the wind-
shield. On systems with Manual Climate Con-
trols, the Recirculation mode is not allowed in
Defrost mode to improve window clearing op-
eration. Recirculation will be disabled auto-
matically if this mode is selected. Attempting
to use Recirculation while in this mode will
cause the LED in the control button to blink
and then turn off.
Automatic Temperature Control
(ATC)
Automatic Operation
1. Press the AUTO hard-key or soft-key button
(4) on the Automatic Temperature Control (ATC)
Panel.
2. Next, adjust the temperature you would like
the system to maintain by adjusting the driver
and passenger temperature hard or soft control
buttons (7, 8, 13, 14,). Once the desired tem-
perature is displayed, the system will achieve
and automatically maintain that comfort level.
3. When the system is set up for your comfort
level, it is not necessary to change the settings.
You will experience the greatest efficiency by
simply allowing the system to function automati-
cally.
213