Caller Id Service; Using Caller Id Service; Caller List; Missed Calls - Panasonic KX-TG6811BX Operating Instructions Manual

Caller ID Service

Using Caller ID service

Important:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– "Out of Area": The caller dials from
an area which does not provide a Caller
ID service.
– "Private Caller": The caller
requests not to send caller information.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.

Missed calls

If a call is not answered, the unit treats it as a
missed call and is displayed. This lets you
know if you should view the caller list to see
who called while you were away.
Even if only one missed call in the caller list is
viewed (page 32), disappears from the
display. When you receive another new call,
is displayed again.
Note:
R Even when there are unviewed missed
calls, disappears from the standby
display if the following operation is
performed by one of the registered
handsets:
– Being replaced on the base unit or
charger.
– Pressing MeN.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
32
TG68xxBX_UE(en)_0523_ver021.pdf
phonebook, the stored name in the
phonebook is displayed and logged in the

caller list.

Caller list
Important:
R Only 1 person can access the caller list at a
time.
R Make sure the unit's date and time setting
is correct (page 14).
Viewing the caller list and calling
back
1
MCN ( )
2
Press MCN to search from the most recent
call, or press MDN to search from the
oldest call.
R If
3
To call back, press M
To exit, press MeN.
Note:
R If the entry has already been viewed or
answered, " " is displayed, even if it was
viewed or answered using another handset.
R If the call matches an entry in the call
barred list, the number is logged with
(page 29).
R If you do not want to dial the area code
when making calls from the caller list, you
can store the area code which you want the
unit to delete automatically (page 30).
Using the Smart Function Key
When
flashes slowly, there are missed calls.
Press M
list and calling back", page 32.
R "Missed Call" must be set to "On" in
"Setting the Smart Function Key", page 15.
32
is displayed, not all of the
information is shown. To see the
remaining information, press MEN. To
return to the previous screen, press
MFN.
N.
is displayed and the NR indicator
N in step 1 on "Viewing the caller
2013/05/23 16:41:16