Vinotemp VT-100 WINEDISP4 Owner's Manual page 23

• Hold the stopper-dispenser and press the latch at the coupling socket to
disconnect the coupling plugs.
• Remove the bottle and stopper-dispenser from the rack.
• Hold the stopper-dispenser and turn the thumbwheel counter-clockwise all the
way to loosen it from the bottle neck.
• Get a new bottle and place the stopper-dispenser onto the bottle neck.
• Hold down the stopper-dispenser and turn the thumbwheel clockwise to tighten
the bottle neck with your thumb and forefinger only.
• Place the bottle in the rack and connect the wine coupling plug and socket at the
stopper-dispenser, then connect the gas coupling plug and socket.
• When bubbles stop forming at the stopper-dispenser, the bottle seal is good.
Dispensing Wine
• Press and hold the dispensing button to dispense
the selected wine into your glass.
• Release the button to stop dispensing.
• Keep glass under the spout until wine stops
dripping.
23
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m