Ricoh PENTAX K-3 Operating Manual page 76

Setting
Enable
AF1
Enable
AF2
AF
Button
Cancel AF
5
Optical
Preview
Preview
Dial
Digital
Preview
4
Press F.
The [Button Customization] screen reappears.
Repeat Steps 2 to 4.
5
Press F twice.
u Caution
• [LCD Panel Illumination] in [RAW/Fx Button] cannot be
selected when [22. LCD Panel Illumination] is set to [Off]
in the E4 menu.
74
Function Page
Autofocus is performed
when I is pressed.
Autofocus is performed
when I is pressed and
not when the shutter
release button is
pressed halfway. p.44
While I is pressed,
autofocus is not
performed even when
the shutter release
button is pressed
halfway.
Activates the Optical
Preview.
p.48
Activates the Digital
Preview.
Setting the One Push File Format
1
Set [RAW/Fx Button] to [One Push File Format]
in Step 3 of "Setting the Button Operation" (p.73).
2
Select T or S for [Cancel after 1 shot].
The recording format returns to the [File Format] setting
of [Image Capture Settings] in the A1 menu after
T
a picture is taken. (Default setting)
The setting is retained until any of the following
operations is performed:
• When is pressed again
S
P
• When B, or
F G
dial or main switch is turned
3
Select the file format when
P is pressed.
The left side is the [File Format]
setting and the right side is the
file format when is pressed.
P
u Caution
• The One Push File Format function cannot be used when
[Memory Card Options] is set to [Separate RAW/JPEG]
in the A1 menu. (p.37)
is pressed, or when the mode
RAW/Fx Button RAW/Fx Button
One Push File Format One Push File Format
Cancel after 1 shot Cancel after 1 shot
Cancel Cancel OK OK