Ricoh PENTAX K-3 Operating Manual page 59

3
Press G.
The parameter setting screen appears.
4
Set the parameters.
Available operations
Selects a parameter.
AB
Adjusts the value.
CD
Q Switches between [Contrast],
[Contrast Highlight Adjustment]
and [Contrast Shadow Adjustment].
R Switches between [Sharpness],
[Fine Sharpness] and [Extra Sharpness].
(Not available in C mode).
Resets the adjustment value to the default
M
setting.
5
Press E.
The screen of Step 2 reappears.
6
Press E.
The camera returns to standby mode.
Saving the Cross Processing Settings
of a Captured Image
The outcome of Cross Processing varies each time a picture
Saturation Saturation
is taken. If you take a cross processed image that you like,
Check Check
you can save the Cross Processing settings used in that image
so that you can repeatedly use the same settings.
1
Cancel Cancel OK OK
2
3
4
t Memo
• The saved Cross Processing settings can be loaded by
selecting [Cross Processing] in Step 2 of "Custom Image"
(p.56), and selecting [Favorite 1 - 3] for the parameter.
Press B in single image display of playback mode.
The playback mode palette appears.
Select a and press E.
The camera will search for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
Use Q to select a cross
processed image.
Select a number and press E.
The settings of the selected image are saved to Favorite 1
to 3.
3
100-0001 100-0001
Saves this image's Cross Saves this image's Cross
Processing settings Processing settings
Save as Favorite 1 Save as Favorite 1
Save as Favorite 2 Save as Favorite 2
Save as Favorite 3 Save as Favorite 3
Cancel Cancel OK OK
57