Monitor Display - Ricoh PENTAX K-3 Operating Manual

h Rear e-dial (R)
Changes the value for camera settings such as exposure.
(p.38)
You can change the menu tabs when a menu screen
is displayed. (p.18)
You can change the settings when the control panel
is displayed. (p.17)
In playback mode, use this to magnify an image or display
multiple images at the same time. (p.36, p.62)
i AF button (I)
Available for adjusting focus, instead of pressing the shutter
release button halfway. (p.44)
j AE Lock button (H)
Locks the exposure value before shooting.
In playback mode, the JPEG image that was just taken
can also be saved in RAW format. (p.36)
k Green button (M)
Resets the values being adjusted.
Switches to ISO AUTO when adjusting the sensitivity.
l Stills/Movies switch
Switches between A (Still capture) mode and C (Movie
recording) mode. (p.33)
m OK button (E)
When a menu or the control panel is displayed,
press this button to confirm the selected item.
n Change AF Point/Card slot switch button (c / d)
In capture mode, press this button to enable changing
the AF point. (p.46)
In playback mode, press this button to switch between the
memory cards inserted in the two slots, SD1 and SD2. (p.36)
o Four-way controller (ABCD)
Displays the Drive Mode/Flash Mode/White Balance/
Custom Image setup menu. (p.16)
When a menu or the control panel is displayed, use this
to move the cursor or change the item to set.
Press in single image display of playback mode to display
B
the playback mode palette. (p.61)
When selecting the area of an image to magnify or to use
as a focusing area, you can move the area diagonally by
pressing two keys at the same time.
p MENU button (F)
Displays a menu. Press this button while the menu
is displayed to return to the previous screen. (p.18)

Monitor Display

Capture Mode
With this camera, you can take pictures while looking through
the viewfinder or while viewing the image on the monitor.
When using the viewfinder, you can take pictures while
checking the status screen displayed on the monitor and
the viewfinder. When not using the viewfinder, you can take
pictures while viewing the Live View image displayed on
the monitor.
The camera is in "standby mode" when it is ready to shoot, such
as when the status screen or Live View image is displayed.
Press G in standby mode to display the "control panel" and
change settings. (p.17) You can change the type of information
displayed in standby mode by pressing G while the control
panel is displayed. (p.12)
2 5 0 2 5 0
1/ 1/
5.6 5.6 1 6 0 0 1600
F F
12345 12345
12345 12345
Standby mode
(Status Screen)
2 5 0 2 5 0
1/ 1/
5.6 5.6
F F
Status Screen Status Screen
12345 12345
12345 12345
Shooting Info Display selection screen
ISO AUTO Setting ISO AUTO Setting 12345 12345
Adjustment Range Adjustment Range 12345 12345
100-3200 100-3200
09/09/2013 09/09/2013 10:30 10:30
Control panel
1 6 0 0 1600
1
9