Ricoh PENTAX K-3 Operating Manual page 14

Shooting Info Display
You can change the type of information displayed in standby
1
mode by pressing G while the control panel is displayed.
Use CD to select the type and press E.
When shooting with the viewfinder
Status Displays the settings for shooting with
Screen the viewfinder. (p.10)
Displays the camera
angle.
A bar scale indicating
the horizontal camera
angle appears at the
Electronic bottom of the screen,
Level and a bar scale
indicating the vertical
camera angle appears
on the right side.
If the camera angle cannot be detected, both ends
and the center of the bar scales flash red.
Display Nothing is displayed on the monitor.
Off
The current latitude, longitude, altitude, direction,
and Coordinated Universal Time (UTC) are
Electronic displayed. Turn the camera off and on again
Compass to return to the status screen.
Available only when the optional GPS unit is
attached to the camera and is operating. (p.87)
When shooting with Live View
Standard
The Live View image and the settings for
Information
shooting with Live View are displayed. (p.10)
Display
No Information Certain icons, such as those for the Exposure
Display Mode and Drive Mode, are not displayed.
12
The captured image and shooting information are displayed
in single image display of the playback mode.
Press G to change the type of information displayed in single
image display. Use CD to select the type and press E.
Example:
Tilted 1.5° to the left
(yellow)
Vertically level (green)
(Standard Information Display)
Standard
Information Display
Detailed
Information Display
Histogram Display
RGB Histogram
Display
No Information
Display
When the camera is held vertically
When the camera is rotated to the vertical
position, the status screen and control
panel are displayed in a vertical position.
To not display images in the vertical
position, set [Auto Screen Rotation]
to [Off] in [LCD Display] of the D1 menu.
(p.23)
Playback Mode
100-0001 100-0001
1/ 1/
2000 F2.8 2000 F2.8 200 200 +0.3 +0.3
Single image display
Captured image, file format, exposure
value, and operation guide indicators
are displayed.
Detailed information on how and when
the image was taken is displayed (p.13).
Captured image and brightness
histogram are displayed (p.14).
Not available during movie playback.
Captured image and RGB histogram
are displayed (p.14).
Not available during movie playback.
Only the captured image is displayed.
2 5 0 250
1/ 1/
5.6 5.6
F F
1 6 0 0 1600
12345 12345
12345 12345
100-0001 100-0001
Standard Information Display Standard Information Display
1/ 1/ 2000 2000 F2.8 F2.8 200 200 +0.3 +0.3
Playback Info Display
selection screen