Watching Tv; Turning On The Power; Turning Off The Power; Simple Button Operations For Changing Channels - Sharp Aquos LC-46G7X Operation Manual

Watching TV

Turning on the power

Press POWER on the TV.
• POWER indicator (Green): The TV is on. (After a few seconds,
an image appears with sound.)
• After turning the power "ON" by pressing POWER on the TV,
you can turn the power ON/OFF by pressing POWER on the
remote control.
POWER indicator

Turning off the power

Press POWER on the remote control.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV changes from green to red.
Press POWER on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by POWER on the TV, you cannot
turn on the power by pressing POWER on the remote control.
POWER indicator
Off Power off
Red The TV is in standby mode.
Green The TV is on.
NOTE
• If you are not going to use this TV for a long period of time, be
sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the TV is turned off by POWER
on the TV.
POWER button
16
POWER button
Simple button operations for
changing channels
You can change channels in several ways.
Using CHr/son the remote control unit
• Press CHr to increase the channel number.
• Press CHs to decrease the channel number.
NOTE
• CHr/s on the TV operates the same as CHr/son
the remote control unit.
Using 0 – 9 on the remote control unit
Select the channels directly by pressing buttons 0 to
9.
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
When viewing Teletext information
View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0 to 9.