Speaker Setup; Connecting External Speakers; External Audio Bypass - Sharp Aquos LC-46G7X Operation Manual

Useful adjustment settings

Speaker Setup

Connecting external speakers

1
Press POWER on the top TV panel to turn it
off.
2
Connect external speakers to the TV.
Rear view
Right
External speakers
Connecting speaker cables
Push up the tab.
1 1 1 1 1
Insert the end of the cable
2 2 2 2 2
into the hole while pressing
up on the tab.
Release the tab.
3 3 3 3 3
CAUTION
• Make sure external speakers have 4 ohm and 15 watt
specifications.
• Speaker terminals and speaker cables have plus and
minus polarities. Make sure that each polarity of terminals
and cables is connected with the same polarity when
connecting external speakers.
• Insert the speaker cable's lead wire carefully so that it
goes straight to the hole of the speaker terminal. The
speaker cable needs to be firmly inserted until the speaker
cable's lead wire reaches the metal part of the speaker
terminal.

External Audio Bypass

External Audio Bypass automatically optimises the
audio quality to suit internal (supplied) speakers.
Selected item
Yes
No
Left
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Speaker Setup", and
then press ENTER.
4 Press a/b to select "External Audio
Bypass", and then press ENTER.
5
Press c/d to select "Yes" or "No", and then
press ENTER.
When you are using your own speakers,
output the original sound.
Sets the optimum audio for the internal
(supplied) speakers.
Description
33