Supplying Electric Power To The Antenna - Sharp Aquos LC-65RX1X Operation Manual

Preparation
Supplying electric power to the
antenna
When you set-up the DTV antenna for the fi rst time,
or connect the antenna to a community antenna, you
need to proceed to set the antenna by following this
manual.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Antenna Setup-
3
DIGITAL" and then press ENTER.
Press a / b to select "Supply Voltage" and
4
then press ENTER.
Press c / d to select "On" and then press
5
ENTER.
Selected item
On Select "On" when your antenna is set-up
and connected independently.
Select "Off" when you do not need to
Off
supply voltage to your antenna, i.e. when
your antenna is connected to a community
antenna. (The factory default setting of this
function is "Off".)
10
Description