Turning The Tv On/Off; Turning On The Power; Turning Off The Power; Supplying Electric Power To The Antenna - Sharp LC-40LX710H Operation Manual

Preparation

Turning the TV on/off

Turning on the power

Press POWER on the TV.
• POWER indicator (Green): The TV is on. (After a few
seconds, an image appears with sound.)
• After turning the power "ON" by pressing POWER on the
TV, you can turn the power ON/OFF by pressing POWER
on the remote control.
POWER button
POWER indicator

Turning off the power

POWER button
Press POWER on the remote control.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV changes from green to
red.
Press POWER on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by POWER on the TV, you
cannot turn on the power by pressing POWER on the
remote control.
16
40LX710H_en.indd 16 40LX710H_en.indd 16
POWER indicator
Light off Power off
Lighted (Red) The TV is in standby mode.
Lighted (Green) The TV is on.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby
mode.
Supplying electric power to the
antenna
When you set-up the D–TV antenna for the fi rst time,
or connect the antenna to a community antenna, you
need to proceed to set the antenna by following this
manual.
Press D–TV to access D–TV mode.
1
Press MENU and the MENU screen displays.
2
Press c / d to select "Setup".
3
Press b / c / d to select "View setting".
4
Press a / b to select "Channel settings" and
5
then press ENTER.
Press a / b to select "Antenna setup-DIGITAL"
6
and then press ENTER.
Press a / b to select "Supply voltage" and
7
then press ENTER.
Press c / d to select "On" and then press
8
ENTER.
Selected item
On Select "On" when your antenna is set-up
and connected independently.
Typical supply voltage: 5V
Typical supply current: 50mA
Off Select "Off" when you do not need to
supply voltage to your antenna, i.e.
when your antenna is connected to a
community antenna. (The factory default
setting of this function is "Off".)
Description
2010/04/15 16:11:17 2010/04/15 16:11:17