Teletext Language Setting; Displaying Subpages; Time Display - Sharp Aquos LC-65RX1X Operation Manual

Teletext function

Teletext language setting

If Teletext information does not display correctly,
perform the procedure below.
Select from among 4 kinds of language tables: West
Europe, East Europe, Greek/Turkish, Cyrillic.
Each table is compatible with the Teletext languages
listed below.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Text Language", and
3
then press ENTER.
Press a / b to select receivable teletext
4
broadcasting language in your country.
[ Setup ... Text Language ]
MENU
• West Europe — English, French, Scandinavian,
Czech, German, Spanish, Italian
• East Europe — Polish, French, Scandinavian,
Czech, German, Slovenian/Croatian, Italian,
Rumanian
• Greek/Turkish — English, French, Scandinavian,
Turkish, German, Spanish, Italian, Greek
• Cyrillic — English, Russian, Estonian, Czech,
German, Spanish, Ukrainian, Lettish
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.

Displaying Subpages

You can display subpages as they are transmitted.
West Europe
East Europe
Greek/Turkish
Cyrillic
Press m to display Teletext.
1
Press 1 to display the subpage as shown
2
below.
Subpage screen
– +
Select the desired subpage by using CH r /
3
CH s , Red or Green.
• 0 - 9 directly selects the desired subpage.
Press 1 to exit the subpage screen.
4

Time display

You can display the time information included in the
DTV and Teletext broadcast.
NOTE
• Skip step 1 if receiving DTV broadcasts.
Select a TV channel providing Teletext
1
information.
(The time information is automatically
captured.)
Press DISPLAY. The channel display will
2
appear on the display.
Press DISPLAY again within the three-
3
seconds interval the channel display is on the
screen. Time information will display on the
lower of the screen for about three seconds.
Even when you change the TV channel, you
4
can display the time information with steps 2
to 3 above.
NOTE
• The time display cannot be stored once the power is turned
off. When you turn on the power, perform steps 1 to 4 again.
• If acquired successfully the time information will appear in
the upper-right corner of the screen by pressing MENU.
63