Av Mode Selection; Wide Screen Signalling (Wss) (For Tv/Av Input Mode); Picture Aspect Ratio (For Tv/Av Input Mode) - Sharp Aquos LC-37GA4X Operation Manual

Useful adjustment settings

AV mode selection

AV mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.
1
Press AV MODE.
• Present AV mode displays.
2
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes as shown below.
AV input mode
AV MODE: STANDARD
AV MODE: DYNAMIC
AV MODE: USER
PC input mode
AV MODE: STANDARD
Selected item
For a highly defined image in a normally
STANDARD
bright room
MOVIE For a movie
GAME Lowers image brightness for easier viewing.
Allows the user to customise settings as
USER
desired. You can set the mode for each
input source.
For a clear-cut image emphasising high
DYNAMIC
contrast for sports viewing
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
AV MODE: MOVIE
AV MODE: GAME
AV MODE: USER
Description
Wide screen signalling (WSS) (for
TV/AV input mode)
WSS allows a television to switch automatically among
the different screen formats.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "WSS", and then press
ENTER.
4
Press c/d to select "On" or "Off", and then
press ENTER.
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
• This function is available for AV input mode and TV tuner
mode.
Picture aspect ratio (for TV/AV input
mode)
The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "4:3 Mode", and then
press ENTER.
4
Press c/d to select "Normal" or
"Panorama", and then press ENTER.
WSS signal 4:3 screen
4:3 mode "Normal"
Selected item
Normal range keeping 4:3 or 16:9 aspect
Normal
ratio
Panorama Wide image without side bars
4:3 mode "Panorama"
Description
39