Operating Determinations; Description; Features - Omnitronic DXO-48E User Manual

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

OPERATING DETERMINATIONS

This device is a professional system-controller. This product is allowed to be operated with an alternating
current of 90-250 V AC, 50/60 Hz and was designed for indoor use only.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Do not operate the device in extremely hot (more than 30° C) or extremely cold (less than 5° C)
surroundings. Keep away from direct insulation (particularly in cars) and heaters.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

DESCRIPTION

Features

Digital stereo active crossover
• 4 inputs und 8 outputs
• Additional USB port and RS485 input and output
• Switch-mode power supply
• Active frequency filter with slopes up to 48 dB/octave split up the audio-signal into different frequency
bands
• The inputs can be split up into a maximum of 4 frequency bands
• The outputs can be split up into a maximum of 8 frequency bands
• 30 user programs can be memorized
• Up to 682.52 ms total delay for the inputs and outputs adustable
• Delay displayed in milliseconds, meters, feet
• Output limiter with ajustable limits and automatic attack and release settings as overload protection for your
amplifying system
• Lock-function for protecting the program settings
• Phase Invert switch per output
• Minimum system-requirements: CPU 500 MHz or higher, VGA-card, 128 MB memory, 10 MB of free hard
disc space, CD-Rom drive, free COM-port, Windows XP, mouse, keyboard
The OMNITRONIC system-controller is designed for professional application.
18/26 00029891.DOC, Version 1.0