Kenmore 911.93501 Use And Care Manual page 24

I
÷
CARE ANDCLEANING
Removable Parts {cont.)
÷
CLEANING MATERIALS
• Dishwashingdetergent
• Warm water
• Soft cloth
Clear
Molded Groove
SpringClip
TO REMOVE
1. Be sure the controlknob is in the
OFF position.
2. Pullstraightoffthe stem.Using a
piece of string can make removing
the knobeasier.Slip the string
underand around the knob,
pullingstraightout.
TO CLEAN
Wash the knob thoroughly with
soapy water. Dry completely with
a soft cloth. DO NOT let the
knob soak.
TO REPLACE
1. Check the back of the knob.
2. The molded rib of the knob is
designedto fit perfectlyonto the
knobstem.
3. Alignthe molded rib to the clear
groovein the knobstem. Push the
knob back as far as it willgo.
Disconnect electrical
power to the oven at
or fuse box before attempting to
Bye
BaH . Collar
Ught
Bulb
Bulb
Cover
TO REPLACE
1. Hold your hand under the bulb
cover and firmly pushback the bail
wire, until it clears and releases the
bulb cover.
2. Unscrewthe light bulb.
3. Replacethe bulb with a 31/2"
40-watt appliance bulb.
4. Place the bulb cover into the
grooves of the socket and pull the
bail wire forward until itrests in the
indentation on top of the bulb
cover.
÷
24