Control Knobs - Kenmore 911.92391 Owner's Manual

CARE ANDCLEAHIH8
RemovableParts
CLEANING MATERIALS
o Dishwashing detergent
o Warm water
• Soft cloth
Holded Rib
Clear ,----.-._,
_roove in
Sp_ing Clip
TO REHOVE
1, Be sure the control knob is in the
off position,
2. Pull straight off the stem, Using a
piece of string can make removing
the knob easier, Slip the string
under and around the knob,
pulling straight out,
TO CLEA_
Wash the knob thoroughly with soapy
water. Dry completely with a soft
cloth. DO NOT let the knob
soak.
TO REPLACE
t. Check the back of the knob,
2. The molded rib of the knob is
designed to fit perfectly onto the
knob stem,
3. Align the molded rib to the clear
groove in the knob stem. Push the
knob back as far as it wilt go.
P" I I' I'PlI_ I II I 'J_ltlI
CAUTION: Be sure
the oven light
switch is in the off
position. Do not
touch a hot light bulb with
wet hands or a wet cloth.
Wait until the bulb has
cooled and use a dry cloth.
Never touch the live collar
of the bulb. If you are re.
placing a broken light bunb,
make sure the power supply
is off.
__- Glass Retainer
Live
"-.,_,) Collar
Bulb _\---J-..
Glass Cover "_
TO REPLACE
I. Unscrew glass cover and remove.
2. Unscrew the light blub.
3. Replace the bulb with a 3 1/2" 40
watt appliance bulb,
4.. Replace the cover.
19