Startup Menu - Texas Instruments TravelMate 5000 Series User Reference Manual

Accessing the Setup Programs

Startup Menu

Each time your system boots, the Startup Menu appears.
You have ten seconds to make selections from this menu,
otherwise the boot process continues with previously
configured parameters. The following is a description of the
Startup Menu:
Windows for Workgroups
(default)
Windows for Workgroups
with PC Card support
MS-DOS prompt
MS-DOS prompt with PC
Card support
PC-Doctor Diagnostics
System Maintenance and
Backup
Games Demonstration
Note: System backups can also be done using the
n
DiskMaker utility in Windows. This utility is located in the
Utilities directory in the TravelMate Notebook Center group.
1-4 Using the Setup Programs
Startup Menu Options
Option Description
Loads standard Windows for Workgroups
files and excludes PCMCIA.
Loads standard Windows for Workgroups
files and PCMCIA drivers.
Does not load any extra drivers and does
not run Windows.
Does not load Windows, but will load
PCMCIA drivers.
Allows you to diagnose and correct
problems on TM5000 Series computers.
Allows you to create backup system
diskettes, to delete image files, or to delete
files that allow you to create the backup
diskettes. If the files are deleted, you will be
unable to create backup diskettes again
and must order new backup diskettes from
Texas Instruments.
Allows you to view or play pre-loaded
games on the notebook or delete demo
games.