Playing Several Waveform Files - Texas Instruments TravelMate 5000 Series User Reference Manual

Zooming into a Larger View
You can zoom into a portion of the waveform by double
clicking inside the view area. Once you have this zoom
view, it is possible to see a wider range of frequencies. You
can then select the portion of the waveform you want to
edit by clicking and dragging over the waveform section.
Edit by pressing the Shift key and clicking the left mouse
button simultaneously. This highlights the region between
the two selection points.
Note: You can't scroll the view area while you select a
n
portion of the waveform. You can't click and drag outside
of the waveform view area to scroll. You can only select one
zoom mode at a time.

Playing Several Waveform Files

You can select a number of waveform files and drop the
selection into Pocket Recorder to play. To do this, minimize
the Pocket Recorder dialog box, select one or more
waveform files (using a File Management tool), and drop the
selection into Pocket Recorder. Pocket Recorder plays all
selections in order unless you maximize the Pocket
Recorder application.
Click on the mouse button while the insertion point is
in the waveform view area and drag the mouse until a
portion of the waveform is highlighted.
Hold down the Shift key and click the mouse button at
a point in the view area. This method selects a region
between the current insertion point (if no position has
been selected, the selection begins at the beginning of
the view area) and the position where the mouse is
clicked.
Windows Utilities
Sound 8-9