Sony STR-DN840 Operating Instructions Manual page 77

To cancel pairing operation
Hold down BLUETOOTH after step 3.
"CANCEL" appears on the display panel.
Playing music of a
Bluetooth device
You can operate a Bluetooth device by
connecting the receiver and a Bluetooth
device using AVRCP.
Check the following before playing music:
– The Bluetooth function of the Bluetooth
device is turned on.
– Pairing has been completed.
1
Press BLUETOOTH to select
Bluetooth function.
The receiver automatically connects to
the last connected Bluetooth device.
If you cannot connect with a last
connected Bluetooth device, press
BLUETOOTH on the receiver.
Once the connection is established,
proceed to step 3.
2
Establish a connection from the
Bluetooth device.
For details, refer to the operating
instructions of your Bluetooth device.
3
Start playback from the Bluetooth
device.
You can also press N on the remote
control.
4
Adjust the volume.
2
Press +/– (or turn the MASTER
VOLUME knob on the receiver).
Note
Depending on the type of Bluetooth device,
you can adjust the volume using the controls
of the Bluetooth device.
Notes
• Once the connection is established, the device
name appears on the TV screen and "BT" lights
up on the display panel.
• To disconnect from a Bluetooth device, press
BLUETOOTH on the receiver. You can also
disconnect from your Bluetooth device. For
details, refer to the operating instructions of
your Bluetooth device.
• While connected to a Bluetooth device, this
receiver cannot be detected and a connection
cannot be established from another Bluetooth
device.
• If you cannot connect with a paired Bluetooth
device, perform the pairing operation between
the receiver and the Bluetooth device again.
• If the input has been set to "BLUETOOTH"
when you turn on the receiver, the receiver
automatically connects to the last connected
Bluetooth device.
To operate the Bluetooth
device using the remote
control
N
X
x
Press Operation
N*
Starts play.
X
Pauses play.
x
Stops play.
m/M Fast reverses or forwards.
./> Goes to the previous/next file.
* If no Bluetooth device is connected and you
press N, the receiver automatically connects
to the last connected Bluetooth device and play
back the music.
Note
These operations may not be available for certain
Bluetooth devices. In addition, the actual
operations may differ depending on the
connected Bluetooth device.
m/M
./>
77
US