Hw Setup; Accessing Hw Setup; Hw Setup Window - Toshiba TECRA M3 User Manual

TECRA M3

HW Setup

This chapter explains how to use TOSHIBA HW Setup program to
configure your computer. And the method of a setup of Execute-Disable Bit
Capability and TPM is explained. TOSHIBA HW Setup lets you configure
settings for General, Display, Boot Priority, Keyboard, CPU, LAN, Device
Config, Parallel/Printer and USB.

Accessing HW Setup

To run HW Setup, click start, click Control Panel, click Printers and
Other Hardware and select TOSHIBA HWSetup.

HW Setup window

The HW Setup window contains the following tabs: General, Display, Boot
Priority, Keyboard, CPU, LAN, Device Config, Parallel/Printer and USB.
There are also three buttons: OK, Cancel and Apply.
OK
Cancel
Apply
User's Manual
Chapter 7
Accepts your changes and closes the HW Setup
window.
Closes the window without accepting your
changes.
Accepts all your changes without closing the HW
Setup window.
7-1