Advanced Port Replicator Iil - Toshiba PORTEGE M300 User Manual

Optional Devices

Advanced Port Replicator IIl

In addition to the ports available on the computer, the Advanced Port
Replicator lll provides serial port and separate ports for PS/2 mouse and
PS/2 keyboard. The Advanced Port Replicator connects directly to the
docking interface on the underside of the computer. The AC adaptor
connects the Advanced Port Replicator to a power source.
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer's default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures
You must connect the AC adaptor before you connect to an Advanced
Port Replicator III.
When an Advanced Port Replicator III is connected to the computer,
you can not use the following computer's ports: Modem jack, LAN jack,
External monitor port.
The PORTÉGÉ M300 does not support the DVI and i.LINK ports on the
Advanced Port Replicator III.
The following ports and accessories are available on the Advanced Port
Replicator III.
RJ45 LAN jack
RJ11 Modem jack
External monitor port
Parallel port
Serial port
PS/2 mouse port
PS/2 keyboard port
DC IN 15V jack
Security lock slot
Audio line-in, line-out jacks
Universal Serial Bus 2.0 port (four)
i.LINK (IEEE 1394) port (This port is not supported by the computer).
DVI port (This port is not supported by the computer).
8-14
.
User's Manual