Lark FreeBird 43.3 User Manual page 21

Troubleshooting
After connecting the device to a PC it is found and recognised as an unknown device
?
Detach the device, install ActiveSync software first and than connect the device
again.
The device cannot be switched on – power problems
?
The battery is flat or almost flat. Connect the device to power supply (eg. to the car
power outlet using the car charger).
After switching on the device such a screen appears:
?
This is a screen calibration request.
When a black cross appears on the screen press
the very centre of the cross, using your pointing pen.
Than the cross will move to another position, again
press the centre of it.
?
Continue until the „OK" message appears. Than touch
the screen to confirm the calibration setting and return
to the main menu.
Remark!
?
We kindly request you to use external microSD cards for any extra multimedia files
you might like to play (WMV, WMA, JPEG, TXT etc.) or additional maps you would
like to use.
?
Every manipulation in the internal memory of the device (incl. installation of
additional applications) may result in loss of the original navigation software that
you might have had received with your device. All the changes in the internal
memory are done on the user's sole responsibility and at their own risk.
20
.