Using The Device; Switching On/Off The Device; Pointing Pen; System Reset - Lark FreeBird 43.3 User Manual

Using the device

Switching ON/OFF the device

Press the POWER
will appear and the software will load up.
When the device is in navigation, music or video
mode you can return to the main menu screen
simply touching the
part of the device.
CAUTION!
If the battery is flat the device will not switch on;
you must charge the battery first.
Press the POWER
mode. To switch off the device press the
button and hold it for ca. 3 seconds.
Stand-by mode allows you to darken the screen
temporarily, but when you press the
again, the device will immediately return to the last
active screen. Switching off the device completely
means that when you press the
again the software will load up from the beginning.

Pointing pen

The pointing pen is inserted to a slot in the back side of the device.
1. Single click – touch the screen once.
2. Double click – touch the screen twice quickly.
3. Dragging – touch the screen in the starting point than move the pen to the
destination.

System reset

If the system seems jammed please use the pointing pen to press the RESET button
(on the back side of the device, above the USB port).
WARNING!
All unstored data will be removed after resetting the system.
button. The welcome screen
POWER button on the upper
button shortly to enter stand-by
POWER
POWER
POWER
button
button
9