Unpacking; Parts List; Additional Tools Required - Bosch MIC Series 550 Classic Installation And User Manual

12 en | Unpacking
3

Unpacking

This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are missing,
notify your Bosch Security Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
NOTICE!
Do not stand the canted (45°) MIC Series 550 Classic camera upright as it is unstable unless
properly mounted.
3.1

Parts List

The package containing the MIC Series 550 Classic camera should include the following
items:
Quantity Part
1
1
3.2

Additional Tools Required

The following table lists additional tools required (not supplied by Bosch):
Quantity Part
1
1
1
1
1
F.01U.276.622 | 1.0 | 2012.09
MIC Series 550 Classic Camera
Nebar gasket
13 mm wrench for the PCD foot, fixing bolts
3 mm screwdriver for the terminal blocks in power supply
8 mm screwdriver for fixing screws for MIC Series PSU enclosure
No. 2 Phillips screwdriver for adjusting the rain shield, if required
Silicone sealant for ensuring a water tight seal [if not using the Nebar gasket]
Installation and User Manual
MIC Series 550 Classic Camera
Bosch Security Systems, Inc.