Cisco 8961 Setup page 4

For cisco unified communications manager 10.0 (sip)

Hide thumbs Also See for 8961:

Secure the Phone with a Cable Lock

You can secure the phone to a desktop with a laptop cable lock. The lock connects to the antitheft security

connector on the back of the phone and the cable can be secured to a desktop.

The security slot can accommodate a lock up to 20 mm wide. Compatible laptop cable locks include the

Kensington laptop cable lock and laptop cable locks from other manufacturers that can fit into the security

slot on the back of the phone.

Procedure

Step 1

Wrap the looped end of the cable lock and wrap it around object to which you want to secure your phone.

Step 2

Pass the lock through the looped end of the cable.

Step 3

Unlock the cable lock.

Note

Step 4

Press and hold the locking button to align the locking teeth.

Step 5

Insert the cable lock into the lock slot of your phone and release the locking button.

Step 6

Lock the cable lock.

Note

Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 10.0 (SIP)

There are two kinds of cable locks: keyed and combination. Depending on the type of lock you have,

unlock it by using the key or the correct combination.

For keyed locks, turn the key 90 degrees in the clockwise direction and pull the key out of the lock.

For combination locks, rotate the lock 90 degrees and then scramble the combination.

Phone Setup

9951 9971