Automate Voice Mail - Nokia 2112 User Manual

2112_2_en_apac.fm Page 33 Monday, July 19, 2004 12:04 PM
• At the standby screen, select
Menu > Messages > Voice
messages > Listen to voice
messages, and press Select.
Once you connect and the
prerecorded greeting begins,
follow the automated
instructions to listen to your
voice messages.

Automate voice mail

You can insert special characters
called dialling codes into phone
numbers such as voice mail, and
save the number to a speed dial
location. Dialling codes instruct the
receiving system to pause, wait,
bypass, or accept the numbers that
follow them in the dialling string.
Note: Voice mail services
vary by service provider. The
following instructions are
examples of common
operations. Please check
with your service provider for
specific instructions for
using your voice mail service.
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
M e s s a g e s ( M e n u 1 )
3. Write down your interaction with
the recorded prompts
step-by-step. Keep in mind that
each voice mail service may vary.
However, it should look
something like this:
Dial 2145551212, pause 5
seconds, press 1, pause 2
seconds, press 1234, and press *.
Be precise; you will need this
information in "Set up voice mail
with dialling codes" on page 34.
Insert dialling codes
Press * repeatedly to cycle through
dialling codes. Once the desired code
appears in the display, pause briefly
and the code is inserted into the
dialling string.
The following dialling codes are
available:
Dialling
Indicates...
code
* Bypasses a set of
instructions.
+ International access.
p Pauses for 2.5 seconds
before sending any
numbers that follow.
w Waits for you to press
the Send key before
sending the numbers or
codes that follow.
33