Call And Set Up Your Voice Mail; Listen To Your Voice Mail; Automate Voice Mail - Nokia 6265 User Manual

9244299_6265_en_au_oth.fm Page 29 Wednesday, October 26, 2005 11:07 AM
Call and set up your voice
mail
1. After you save the voice mailbox, in
standby mode, press and hold 1.
2. When you connect to voice mail
and the prerecorded greeting
begins, follow the automated
instructions to set up your voice
mail.

Listen to your voice mail

After you set up voice mail, you can
dial the number in one of four ways:
• Dial the number using the keypad.
• Press and hold 1.
• Select Listen if there is a
notification on the display.
• In standby mode, select
Messaging > Voice messages
Listen to voice messages.
When you connect and the
prerecorded greeting begins, follow
the automated instructions to listen to
your voice messages.

Automate voice mail

Voice mail services vary by service
provider. The following instructions are
examples of common operations.
Please check with your service provider
for specific instructions for using your
voice mail service.
Write down number and
process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-step.
Note that each voice mail service
may vary. Your steps may resemble
the following:
Dial 2145551212, pause 5 seconds,
press 1, pause 2 seconds, press
1234, and press *.
Be precise; you will need this
information in "Set up voice mail with
dialling codes", p. 29.
Set up voice mail with dialling
Menu >
codes
>
1. In standby mode, select
Contacts > Speed
2. Scroll to an empty speed dials slot,
and select Assign.
3. Enter your voice mailbox number,
including the area code.
4. Refer to dialling codes, and enter
any codes as necessary using the
information that you saved from
"Write down number and process",
p. 29.
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice after the voice
M e s s a g i n g
Menu >
dials.
29