Installation Of Nokia Cdma Modem Driver; Making Connection To Internet - Nokia 2112 User Manual

2112_2_en_apac.fm Page 72 Monday, July 19, 2004 12:04 PM
P C C o n n e c t i v i t y
Installation of Nokia CDMA
Modem Driver
• Before installing the modem
driver, you need to know the
COM port used by DKU-5 data
cable. To check the COM port
used, click Start > Control Panel
> Switch to Classic View.
Note: For Windows2000, click
Start > Control Panel.
• Select System > Hardware >
Device Manager.
• Click Ports (COM & LPT). If Port
1 on Nokia Adapter indicates
COM5, then select COM5 during
installation of the modem driver.
COM port used by DKU-5 data
cable can be different on
different computers. In some
computers, COM port used will
always change when you
disconnect DKU-5 data cable
from the computer. Therefore,
before making any Internet
connection to Nokia CDMA
phones, please make sure that
Port used for modem is the same
port, as detected by Device
Manager.
• Modem installation will proceed.
Click Start > Control Panel >
Switch to Classic View.
Note: For Windows2000, click
Start > Control Panel.
• Select Phone and Modem
Options.
• On upper side, there are several
Tab options: Dialing rules,
Modems, Advanced.
• Select Modems, then Add, click
Don't detect my modem > Next
> Have Disk.
• Click Browse, then browse to
nmpCDMA_1x(USB).inf file that
you downloaded from
www.nokia-asia.com or http://
www.nokiausa.com/phones/
software/.
• Click OK.
• Select Nokia CDMA2000 1X 3G
Packet Data Modem, click Next.
• Select the same COM port as
detected by Device Manager,
and click Next > Continue
Anyway.
• Modem installation is completed.
Click Finish to complete modem
installation.
Making connection to
Internet
• Click Start > Control Panel >
Switch to Classic View.
Note: for Windows2000, click
Start > Control Panel.
• Click Network Connection >
Create a new Connection >
Next.
• Select Connect to Internet >
Next > Set up my connection
manually > Next.
72