Automate Voice Mail - Nokia 2355 User Manual

Automate voice mail

You can insert special characters called dialing codes into phone numbers such
as voice mail, and save the number to a 1-touch dialing location. Dialing codes
instruct the receiving system to pause, wait, bypass, or accept the numbers that
follow them in the dialing string.
Note: Voice mail services vary by service provider. The following
instructions are examples of common operations. Please check with
your service provider for specific instructions for using your voice mail
service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look
something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,
press #.
Be precise; you will need this information in "Setup voice mail with dialing
codes," p. 37.
Insert dialing codes
Press * repeatedly to cycle through dialing codes. Once the desired code appears
in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before sending any numbers that follow.
w—Waits for you to press the call key before sending the numbers or codes that
follow.
Setup voice mail with dialing codes
1. In the standby mode, select Menu
2. Scroll to an empty 1-touch dialing slot and select Assign.
3. Enter your voice mailbox number, including the area code.
FCC DRAFT
M e s s a g e s
> Contacts > Speed dial.
37