Error Indications On Leds - Tally Dascom 1125 User Manual

Tally Dascom 1125
The printer is on but it will not
print.
Paper select lever error
Printer Failures
A user cannot generally resolve a problem involving defective printer hardware. Power off and on again the
printer to recover any fatal error. If the problem cannot be resolved, contact your dealer or service partner.

Error Indications on LEDs

Error Description
Paper out
Paper jammed
feed /Tractor feed
Print head hot
Carriage initial position
Memory
EEPROM
CMOS chip
• Make sure that the Online indicator is lit.
• If you use the interface cable, make sure it is securely
connected to both the printer and the computer.
• Make sure paper is loaded.
• Run the printer Status Page. If printing executes normally, the
problem is caused by: the interface, the computer, incorrect
printer settings, or incorrect software settings.
• Make sure that the printer driver selected in your software is the
same as the emulation selected on the printer.
If paper is loaded and the paper select lever is moved to the
incorrect position, the printer turns offline, and the buzzer sounds
continuously. Switch the paper select lever back to its correct
position.
Operation Paper
Status Out LED
Normal Flash
Suspend Flash
Suspend On
Normal On
Stop Off
Stop Off
Normal Off
Stop Off
43
Online Tear Off
LED LED
Off No change
Off Flash
Off Flash
Flash No change
Off Flash
Off Flash
Flash No change
Flash Flash
Buzzer
Sound
Once
Once Friction
Continuously
--
Once
--
Once
--