Language Setup - Tally Dascom 1125 User Manual

Tally Dascom 1125
Adjust Physical
[S3]+[S4]
Margins
Service Menu [S1]+[S2]
Restore Factory
[S2]+[S3]+[S4]
Defaults
Menu Setup /
[S1]
EDS
Language
[S2]+[S3]
Setup

Language Setup

The panel menu can display the following languages: English, German, Russian, Italian, French, Spanish and
Turkish. Factory default setting is English. To change it to another language, hold down the [LF/FF] and
[Load/Eject] keys on the panel and power-on. Upon exiting the Language Setup Menu, a listing of the current
configuration is printed, and this is followed by Main Menu Setup.
Below is an example of changing from English to German language:
· Flashing of L3.
· Lights up L4.and L3.
· Lights up L1 or L2 according to current fonts.
· Includes Adjust Fanfold Top Margin, Adjust Single Top
Margin, Adjust Fanfold Left Margin, Adjust Single Left
Margin and Adjust Tear-Off position
· Flashing of L3.
L1, L2,
· Lights up L4.and L3.
L3, L4
· Lights up L1 or L2 according to current fonts.
· Functions are: Vertical Alignment, Change Pin, and
Endless Self-Test.
· Flashing of L3 then extinguish.
· Lights up L4.
L1, L2,
· Lights up L1 or L2 according to current fonts.
L3, L4
· Restore Factory Defaults parameters except Change Pin,
Vertical Alignment and Adjust Page Margin Parameters
Allows for Main Menu setting changes. Please read the
instructions printed on how to change settings when this
mode is activated. (EDS: Electronic DIP Switch)
Allows user to select one of the following languages:
English, German, Russian, Italian, French, Spanish and
Turkish. Factory default is English. Refer to Language Setup
section below for details.
20