Introduction
This document gives a brief introduction to the V422 and V431 VoIP Gateway and basic sample configuration when
using MyNetFone VoIP Service.
V422 Overview
Features
VoIP Protocol
SIP(RFC3261) compatible
VoIP Audio Code
G.729A
G.711 a/ulaw
G.726
G.723.1
DTMF Relay
In-Band DTMF
Out-of-Band DTMF(RFC2833.SIP INFO)
Voice Features
CNG (Comfort Noise Generation)
VAD (Voice Activity Detection)
Silence suppression/detection
Echo Cancellation (G.165/G.168)
Adjustable Jitter Buffer and programmable Gain Control
Multiple SIP Proxy server entries with failover mechanism
FXO hang up detection: Busy Tone cadence auto learning/detection
Support VoIP-to-PSTN (transit out) /PSTN-to-VoIP (transit in) applications
Digit Map for dial plan
Telephone Function
LifeLine (enables a backup PSTN service in case of your VoIP service is unavailable)
Polarity reversal detection (FXO/PSTN) and generation (FXS)
DTMF, Caller ID detection and generation
Hot-Line, Warm-Line support
Group Hunting function
Recordable greeting message
Single Number/Account for multiple ports
VoIP call function
Call Transfer – Unattended, Attended
Call Waiting
Call Hold/Resume
Call Forward – Unconditional, Busy, No Answer
Call Switch
WAN
One 10/100Mbps Ethernet port
Support Static IP, PPPoE, Bigpond Cable ,DHCP and DDNS;
©
Copyright
2012. All Rights Reserved.
3
Need help?
Do you have a question about the Netcomm V422 and is the answer not in the manual?
Questions and answers