Table of Contents
Advertisement
b) Mac OS X - Start the Globetrotter software located in your Applications folder.
2.
Click Connect, and you're online! If you close the software whilst connected, it will stay connected and will remain in the system tray.
.
When you're finished, click Disconnect and close the software, or simply remove the USB Modem. In Windows, you can also click on the Virgin
Broadband system tray icon, and then select Disconnect.
checking STaTUS
The USB Modem will immediately look for the network upon being plugged in. You can check the status of the connection by moving your mouse pointer
over the Virgin Broadband icon in the System Tray to get a quick status report showing the Network Name, Technology being used and the signal quality:
The letters in the bottom left corner of the software will display whether you are connected to a GPRS/EDGE (2G) or HSDPA (HS) network. The bars to the
right of this indicate signal strength (the more bars, the better!).
If you only get 2G when connected to the Internet, try moving locations to improve your connection. Like any mobile, physical location and barriers (walls,
etc) will affect signal.
V2.0
0
Advertisement
Table of Contents
Need help?
Do you have a question about the USB modem and is the answer not in the manual?