Windshield Wipers; Mist Function - Chevrolet Tavera Owner's Manual

Table of Contents

Advertisement

MIST
OFF
ON
INT
REAR
OFF
LO
HI

Windshield Wipers

To operate the windshield wiper, turn the ignition ON and move the windshield
wiper / washer lever downward. The windshield wipers operate in the following
four position :
OFF
: System off. Default position.
INT
: Intermittent operation. Lever down one level
LO
: Continuous wipe, slow speed. Lever down two levels.
HI
: Continuous wipe, fast speed. Lever down three levels.
Do not operate the wipers when the windshield is dry. It may
glass. Check blades are not frozen to windows before operating in cold weather. This
can damage the wiper motor.
Dust on windshield or on blade reduces the wiper blade life significantly and may
cause streak marks on windshield during wiping. In case the vehicle is not used for
more than a week or if dust is accumulated on windshield or wiper, clean the
windshield and blade before using the vehicle. To clean the blade lift the blade to
service position and wipe the lip of rubber element with clean soft cloth.

Mist Function

To operate the windshield wiper once in case of light rain or mist, lightly move the
windshield wiper / washer level towards the MIST position.
The wipers will operate through one cycle.
11
CAUTION
scratch
the windshield

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents