Normal
Burned out
Fuse junction block
The fuse junction blocks are installed under the instrument panel on the drivers
side and in the engine compartment.
The cover can be removed easily by hand. A list of the main fuse circuits and their
amperage is attached to the junction block cover.
The spare fuses (10, 15, and 20A) and removal tool (white) is installed on the
backside of fuse junction block cover, which is in engine compartment.
The drawing at the left illustrates a burned out fuse.
Use a spare fuse of the same amperage for replacement.
*
When replacing a fuse, it is important to use a spare fuse of the amperage
shown on the fuse junction block cover.
*
If the spare fuse also burns out, have the circuit checked at your nearest
CHEVROLET retailer.
138
NOTE